Vibrating feeder is also called vibrating feeding machine. The machine in the production process, may get block, granular materials from store in the bunker even, timing,continuously to devices, in the sand production line can feed for the crushing machinery continuous evenly, and for material coarse screening, vibrating feeder is widely used in metallurgy, coal mine, beneficiation, building materials, chemical, grinding industries such as crushing, screening combination of equipment. This manual introduces you the machine performance, characteristics, and correct installation and use, maintenance methods. For the machine operator, read and fully understand the contents of the manual is very important. So, when use, your machine will provide you with higher efficiency. In order to ensure maximum man-machine safety, the use of tutorial all warning and matters needing special attention, if not to execute according to this manual may cause damage and injuries machine.
Working principle:：
Vibrating feeder primarily consist of a pair of vibration motor with the identical property parameters as excitation source, when two vibration motor at the same velocity do reverse operation, whose eccentric block generated in a particular phase of inertial force repeated stack or offset. Thus produce the huge synthesis vibration dynamic, make the body in bearing spring be forced vibration, and thereby vibration as power, driving the materials in a trough on sliding and throwing motion, thus make the material constantly moved forward and achieve the feeding purpose. When the material through the slot on screen when the smaller material available through the clearance and falling, sieve under way without crushing process,with the removing impurities sieving effect.
Features :
1.Vibration smooth, reliable operation, long life.
2.Can adjust excitation force, can always change and control flow, convenient adjustment stability;
3.Raw material of coarse screening granularity through stick bar to adjust and control themselves ;
4. Vibration motor is the excitation source, low noise, low electric consumption, good adjusting performance, no blunt material phenomenon.
| Model | Funnel size (mm) | Max. feed size (mm) | Capacity(t/h) | Power (kw) | Weight (t) | Overall dimension (L x W x H) ( mm) |
| GZD-900×3800 | 900×3800 | 400 | 80-120 | 6 | 3.89 | 3900x1500x1200 |
| GZD-950×3800 | 950×3800 | 500 | 120-210 | 6 | 3.98 | 3900×1600×1250 |
| GZD-1100×4900 | 1100×4900 | 580 | 160-320 | 11 | 4.52 | 5000×1800×1500 |
| GZD-1200×4900 | 1200×4900 | 650 | 200-430 | 15 | 5.2 | 5000×1900×1700 |
| GZD-1300×6000 | 1300×6000 | 900 | 450-600 | 15 | 6.5 | 6150×1900×2100 |
Any change of technical parameters, there is no further notice.
Copyright ©2010 by Zhengzhou Zhongding Heavy Duty Machine Manufacturing Co., Ltd.
TEL: +86-371-67857655 60305291 60305292 Fax:+86-371-60305293 60305294
Address: Mazhai Industry zone, the middle of the Fourth West Round road, ZhengZhou China E-mail: zd-machine@kssb.cn
